| |
PhosCopper
0
(BCuP-2) |
 |
Copper
and phosphorous alloy offering excellent liquidity
for tight fitting joints. Used extensively in the
Heating, Ventilating and Air Conditioning (HVAC) industry
to make preform rings for evaporators/condensers. |
|
| PhosCopper
0LP |
|
Flow
is more sluggish than the PhosCopper 0. Fit-up should
provide .003-.005" clearance. |
|
| PhosCopper
0HP |
|
For
use with copper or brass. Fluid alloy, requires good
fit-up, .002-.004" clearance. |
|
PhosCopper
2
(BCuP-6) |
|
Combination
of low silver with high phosphorous creates very good
fluidity. While not quite as liquid as PhosCopper
0, tight fit-up is recommended. |
|
PhosCopper
2LP
|
|
Sluggish
flow, used for copper joints with wider clearances
of .003-.006". |
|
| PhosCopper
2HP |
|
Used
for copper or brass. More fluid than the PhosCopper
2LP. Clearances of .002-.005" recommended. |
|
PhosCopper
5
(BCuP-3) |
|
Delivers
moderate liquidity and improved gap filling compared
to PhosCopper 0. The 5% silver content provides good
economy when compared with PhosCopper 15. |
|
| PhosCopper
5LP |
|
Primarily
used where fit-up can't be controlled, clearance .003-.006".
|
|
PhosCopper
5HP
(BCuP-7) |
|
Similar
to PhosCopper 5. Developed especially for use as a
preform alloy, the higher phosphorous content delivers
good liquidity. |
|
| PhosCopper
6 |
|
Medium
range alloy for applications with clearances of .002-.005".
Use with copper or brass. |
|
PhosCopper
6HP
(BCuP-4)
|
|
For
copper or brass. Fluid alloy for controlled clearances
of .001-.004". Good for automated brazing applications.
|
|
PhosCopper
6D
|
|
Premium
alloy developed to mimic brazing performance of PhosCopper
15 at lower cost. |
|
PhosCopper
15
(BCuP-5)
(Formerly AB-15)
|
|
This
very popular alloy offers superior ductility and strength.
It is suitable for wide gap applications. Joint clearances
of .002-.006". Easy to use, good control. Used
extensively in copper tube joining applications. |
